|
|
Mission 1: Delivery and unpacking of a Mill
11:21 17/11/2004 |
So, you save up the money (or more likely make excuses to yourself until you put it on your credit card - "it's okay: it'll pay
for itself in no time!" ;) We've heard that one before - Ed ) and finally order the machine. Your worries may not end right there: in my case the problem began at
my drive. The machine (only weighing 170Kgs) arrived on a pallet but my drive was a gravel one, so the little dolly that took it
from the truck basically ground to a halt, and the driver left the crate blocking my drive half in the street! It seems ludicrous
to me now, but I was stressed to tears that my new baby was lying out on the London road. Of course, it's not like someone could
have just picked it up and ran off with it. In the end I managed to work out a half-compromise and used my car (parked inside) to tow the crate along the gravel into my front garden. This worked quite well with little friction as the gravel acted kinda like
ballbearings.
When I got the crate open I realized how big the thing actually was (these pics don't do it justice) There
really was no way someone was going to just run off with it. A thing I learnt when moving a big old lathe is that with a lot
of machinery like this the best way to move it is to take it to pieces. So (using my camera phone to take a picture of the
electrical connections) I removed the motor, then had some help from a neighbour in taking off the head. Took the table off,
and finally managed to carrry the base through.
A lesson to be learnt here: don't expect the drivers to help you
move anything like this. They're not UPS. They're a palette company and they'll only take it as far as the dolly goes. Make sure
to have a good friend ( multiple friends is better ) handy, and some beer. :)
Taking it apart was a good lesson on the
workings of the machine, and I was very impressed with the build quality. The night before I'd heavily reinforced a pine
table with thick oak and shortened all the legs, as it was both a cheaper and more sturdy option than the stand from the supplier. |
|
Back to Converting a Chinese mill/drill to CNC
|
|
|